Acrylabs - Renewable Roof Systems and Wall Coating Products

2200 Elastomeric Wall Coating
 

Note: You may also view these documents in Adobe Acrobat Reader(.pdf format).

Click Here to view this document in .pdf Format

 

Product Data:

 

2200 is a water born 100% acrylic coating for the construction market.
Utilizing advanced technology the 2200 is formulated for maximum
adhesion to metal, stucco, brick, block and most cementious surfaces.
2200 cures to a strong durable finish that is easily maintained.
2200 is the recommended coating for most exterior walls.


2200 is available in 13 standard colors. Custom matches can be done,
however minimum order quantities apply; consult ACRYLABS for more information.


Application: can be brushed, rolled or sprayed. Final thickness of
2200 will vary depending on surface conditions (porosity, etc.).
A uniform dry film thickness of 12 mils (DFT) is suggested to maintain
a pinhole free membrane. Allow two to four hours between coats.


2200 is available in 1, 5, and 55 gallon plastic containers.

 
For more detailed instructions refer to our Installation Guide or consult ACRYLABS, INC. technical department.
 

 

2200 TECHNICAL DATA

 

            TYPICAL PROPERTIES

            WEIGHT PER GALLON                                12.1 LBS                 ASTM D1475-90                               
            % SOLIDS BY WEIGHT                                66.9                          ASTM D2369-97                                
            % SOLIDS BY VOLUME                                50.8                          ASTM D2697-86                                

            PIGMENT VOLUME                                       43.0%                                                             
            VISCOSITY                                                      110-115 Ku             ASTM D562-01 
            V.O.C.                                                               <100 g/l                    ASTM D3960-01 
            PH                                                                     8.6 - 9.2                    ASTM E70-97
            FLASH POINT                                                 N/A                                                                        

 

 

            TYPICAL PROPERTIES (20 mil DFT)

            LOW TEMPERATURE FLEXABILITY             Passes 1/8” mandrel bend

            ELONGATION AT MAX STRESS                                    240% @ 74F              ASTM C-734

                                                                                                           80% @ 0F

            ELONGATION AT BREAK                                                245% @ 74F              ASTM D-412

                                                                                                           130% @ 0F

            TENSILE STRENGHT AT MAX STRESS                       175psi @ 74F            ASTM D-412

                                                                                                           725psi @ 0F

            TENSILE STRENGHT AT BREAK                                  165psi @ 74F             ASTM D-412

                                                                                                           660psi @ 0F

            RECOVERY AFTER 25% ELONGATION                         65%                            ASTM D-412

            PERMEABILITY (20MILS)                                                 <20 PERMS                 ASTM E96-80

            ACCELERATED WEATHERING                                  NO EFFECT 2 YEARS   ASTM G-53
                                                                                                        WEATHEROMETER
 
 

 

 

 

roofing systems msds

"We cover the future . . . and the past."

 

Renewable - Sustainable - Seamless - Environmentally Responsible
Exceptional Durability - Flexible - UV Resistant - ASTM Tested
Reduces Energy Costs - Outstanding Performance - Unmatched Service