Product Overview
Finish Coat is a water-borne, 100% acrylic coating designed for use in Acrylabs roof systems. It is formulated to provide maximum adhesion to a variety of surfaces, including:
- Asphalt
- Metal
- Modified bitumen
- Concrete
- Wood
- EPDM (Ethylene Propylene Diene Monomer)
- Fiberglass
- Most single-ply membrane systems
The coating cures to a strong, durable finish that is easy to maintain and serves as the final coat in Acrylabs Roof Systems. It is available in white and other colors.
Application Instructions
- Methods: Finish Coat can be applied using a brush, roller, or spray.
- Coating Requirements: A uniform dry film thickness (DFT) of 10 mils per coat is required, with a minimum of two coats to ensure a pinhole-free membrane.
- Surface Conditions: The final thickness may vary depending on the surface’s porosity and texture.
- Drying Time: Allow sufficient time for the coating to dry to the touch before applying additional coats.
Packaging
Finish Coat is available in:
- 5-gallon plastic containers
- 55-gallon plastic containers
Technical Data
- Weight per Gallon: 12 lbs
- Solids by Weight: 67% (ASTM D-1644-A)
- Solids by Volume: 53% (ASTM D-2697)
- Pigment Volume: 43%
- Viscosity: 130-140 Ku (Brookfield, ASTM D-562-A)
- VOC (Volatile Organic Compounds): <50 g/l (ASTM D3960-01, ASTM E70-97)
- pH: 8.6 - 9.2
- Flash Point: Not applicable
- Low Temperature Flexibility: Mandrel Bend at -57°F (ASTM D522-93A)
- Elongation at Break: 196% at 73°F (ASTM D-2370)
- Tensile Strength: 236 psi at 73°F (ASTM D-2370)
- Water Swelling: 9.2 (ASTM-D 471)
- Fungi Resistance: Zero rating (G-53)
- Permeability (20 mils): 21.9 perms (ASTM D1653)
- Accelerated Weathering: No effect after 2 years (ASTM G-53)